Boston Scientific Precision SC-1110 Mode D'emploi page 61

3. Place the Charger over the Stimulator. When the Charger is aligned with the Stimulator, the
beeping will stop.
• Centering the Charger over the Stimulator will ensure the shortest charging time.
• Many patients are able to feel the implanted Stimulator and can place the Charger directly
on top of it.
• Alternatively, centering the Charger within the alignment area (i.e., the area where the
Charger does not beep) will also ensure that the Charger is centered.
4. Secure the Charger over the Stimulator by using either an adhesive patch or the Charging
Belt.
• Adhesive Patch: Remove the clear liner from the patch. Apply the white side with the blue
stripe to the back of the Charger. Then remove the beige liner from the patch. Secure the
Charger over the Stimulator by pressing the adhesive to the skin over the Stimulator (see
diagram below).
• Charging Belt: Place the Charger into the pocket on the Charging Belt with the power button
facing out. Secure the Charger over the Stimulator by adjusting the Charging Belt (see
diagram below).
Rechargeable Stimulator System
Clinician Manual
91173656-02 53 of 385