Boston Scientific Precision SC-1110 Mode D'emploi page 37

Superior (upper or left) leads connect to port "1-L". Inferior (lower or right) leads connect to
port "2-R". If only a single lead is being used, connect it to "1-L".
Note: If using a Splitter 2x8, connect the cable labeled "1-L" to the laser-marked tail, and the
cable labeled "2-R" to the unmarked tail. If using an Infinion CX lead, connect the cable
labeled "1-L" to the tail with one marker band, and the cable labeled "2-R" to tails with
two marker bands.
7. Proceed to the instructions for "Intraoperative Stimulation Testing" on page 30.
Connecting the OR Cable Assembly
Clinician Manual
91173656-02 29 of 385