Boston Scientific Precision SC-1110 Mode D'emploi page 66

Precision™ Spinal Cord Stimulator System Clinician Manual
2. From the Program selection screen, press the
number. Press the
"
from program 4 or the
3. Highlight the desired program and press p to activate the program.
Modifying and Saving Programs
If the stimulation amplitude, pulse width, or rate (see "Additional Area Options" on page 59)
have been changed, the new settings can be saved by following the instructions below.
P
1. Press once to access the Program selection screen, and then press
highlight the desired program.
Note: Typically, patients will want to highlight the currently running program. This program is
underlined (__). Highlighting the underlined program will save the new settings to the
currently running program.
2. To save/store changes, select the appropriate program number and press q. A
confirmation screen will appear.
P
3. Press to confirm and overwrite, or press the
Clinician Manual
91173656-02 58 of 385
button to select the previous program number. Pressing the
button from program 1 returns to the Level screen.
"
P
button to highlight the next program
button to cancel the operation.
"
P
button
P
as needed to