Honda EU65is Mode D'emploi page 87

cap.02 EU65is 6500is (Eu).qxd 07.12.17 4:26 PM ページ2-40
Check the harness connecting the starter motor and GCU for
open or short circuit and for proper connection.
Wire harness check points
ENGINE WIRE
HARNESS
G
Bl
Bl/W
C41
GND5
STARTER
SOLENOID
Check the starter motor (P. 12-4).
Turn the ignition switch OFF and then restart the engine and
recheck. Replace the GCU, if necessary (P. 6-6).
From P. 2-39
CONTROL WIRE HARNESS
G
Bl/W
Viewed from terminal side
Normal
Normal
Abnormal
GCU
Bl: BLACK
G: GREEN
W: WHITE
Abnormal
Replace or repair the engine wire
harness and/or control wire
harness.
Replace or repair starter motor
(P. 12-1 and 3).
2-40