Honda EU65is Mode D'emploi page 63

cap.02 EU65is 6500is (Eu).qxd 07.12.17 4:25 PM ページ2-16
Check the starter motor (P. 12-4).
Check the flywheel ring gear for wear or damage.
Check the harness connecting the starter motor and GCU for
open or short circuit and for proper connection.
Wire harness check points
ENGINE WIRE
HARNESS
G
Bl
Bl/W
C41
GND5
STARTER
SOLENOID
Turn the ignition switch OFF and then restart the engine and
check the error code. If the same error occurs, replace the GCU
(P. 6-6).
From P. 2-15
Normal
Normal
CONTROL WIRE HARNESS
G
Bl/W
GCU
Viewed from terminal side
Normal
Abnormal
Abnormal
Abnormal
GCU
Bl: BLACK
G: GREEN
W: WHITE
Replace or repair starter motor
(P. 12-1 and 3).
Replace the flywheel (P. 12-1).
Replace or repair the engine wire
harness and/or control wire
harness.
2-16