Honda EU65is Mode D'emploi page 81

cap.02 EU65is 6500is (Eu).qxd 07.12.17 4:25 PM ページ2-34
• Engine Does Not Stop
Check whether the engine can be stopped by turning the
ignition switch to the OFF position.
Check the ignition switch (P. 6-11).
Check the harness connecting the ignition switch and GCU for
open circuit or poor ground and for proper connection.
Wire harness check points
ENGINE WIRE
HARNESS
Bl: BLACK
Y: YELLOW
Bu: BLUE
R: RED
W: WHITE
Bl
GND5
Turn the ignition switch OFF and then restart the engine and
recheck. Replace the GCU, if the engine does not stop (P. 6-6).
Does not stop
Normal
CONTROL WIRE HARNESS
W/Bl
IGNITION
G
G
SWITCH
Viewed from terminal side
Normal
Stop takes
10 seconds
or more
Abnormal
Abnormal
GCU
Check whether an error code is
displayed on the i-Monitor when
stopping the engine.
Troubleshoot by "Failure By Error
Code" (P. 2-11).
Replace the ignition switch (P. 6-
6).
Replace or repair the engine wire
harness and/or control wire
harness.
2-34