Honda EU65is Mode D'emploi page 58

cap.02 EU65is 6500is (Eu).qxd 07.12.17 4:25 PM ページ2-11
FAILURE BY ERROR CODE
Error code Overload Oil alert
indicator indicator
batt OFF
OIL OFF
E-00 FLASH
E-01 FLASH
E-02 FLASH
E-03 FLASH
E-04 FLASH
E-05 FLASH
E-06 FLASH
E-07 FLASH
E-08 FLASH
E-09 FLASH
E-10 or E-20 FLASH
E-11 or E-21 FLASH
*(E-12 or E-22) ON
*(E-13 or E-23) ON
*(E-14 or E-24) ON
*(E-15 or E-25) ON
E-16 or E-26 FLASH
E-17 or E-27 FLASH
E-18 or E-28 FLASH
E-19 or E29 FLASH
E-1A or E-2A FLASH
E-1b or E2b FLASH
E-1C or E-2C FLASH
E-1d or E-2d FLASH
*: No error code displayed. Can be displayed in Error Log Mode (P. 2-9).
2-11
Cause of failure
OFF Battery under charged
ON Insufficient oil
OFF Starter motor failure
OFF Starter motor switch input failure
OFF Abnormal battery voltage
OFF Engine temperature sensor
failure
OFF Governor function failure
OFF GCU internal failure or inverter
unit internal failure
OFF
OFF GCU internal failure or inverter
unit internal failure
OFF
OFF
OFF Inverter and generator control
unit communication error
OFF Inverter internal communication
error
OFF Inverter protection activated
OFF
OFF Inverter overheating protection
activated
OFF
OFF Inverter unit internal failure
OFF GCU internal failure or inverter
unit internal failure
OFF
OFF
OFF
OFF
OFF Inverter unit internal failure
OFF
Fail-safe
When turning the ignition switch
to the START position, the starter
motor is stopped.
Engine is stopped.
When turning the ignition switch
to the START position, the starter
motor is stopped.
Display only
Engine is stopped.
Display only
Engine is stopped.
Engine is stopped.
Engine is stopped.
Engine is stopped.
Engine is stopped.
After shutting down the AC output,
the engine is left running at idle
speed (2,300 rpm).
Engine is stopped.
Engine is stopped.
Engine is stopped.
Refer to
page
2-13
2-14
2-15
2-17
2-18
2-19
2-20
2-21
2-22
2-22
2-23
2-24
2-25
2-25
2-26
2-25