Honda EU65is Mode D'emploi page 61

cap.02 EU65is 6500is (Eu).qxd 07.12.17 4:25 PM ページ2-14
OIL
(Insufficient oil)
Check the oil level (P. 3-2).
Check the oil level switch (P. 14-10).
Check the harness connecting the oil level switch and GCU for
open or short circuit and for proper connection.
Wire harness check points
ENGINE WIRE
HARNESS
Y
C42
OIL LEVEL
SWITCH
G
Bl
GND5
Turn the ignition switch OFF and then restart the engine and
check the error code. If the same error occurs, replace the GCU
(P. 6-6).
Correct
Normal
CONTROL WIRE
HARNESS
Y
G
Bl: BLACK
Y: YELLOW
G: GREEN
Viewed from terminal side
Normal
Low
Abnormal
Abnormal
GCU
Add the recommended oil to the
proper level.
Replace the oil level switch (P. 14-
4).
Replace or repair the engine wire
harness and/or control wire
harness.
2-14