Honda EU65is Mode D'emploi page 69

cap.02 EU65is 6500is (Eu).qxd 07.12.17 4:25 PM ページ2-22
E-07 E-08 E-09
, ,
Check the inverter unit, replace if necessary (P. 6-2).
After replacing the inverter unit, turn the ignition switch OFF and then restart the engine and check the error code. If the
same error occurs, replace the GCU (P. 6-6).
E-10 E-20
, (Inverter and GCU communication error)
Check the harness connecting the inverter unit and GCU for
open or short circuit and for proper connection.
Wire harness check points
INVERTER
UNIT
Y: YELLOW
Bu: BLUE
R: RED
W: WHITE
Check the inverter unit (P. 6-3 and 4).
Turn the ignition switch OFF and then restart the engine and
check the error code. If the same error occurs, replace the GCU
(P. 6-6).
(GCU internal failure or inverter unit internal failure)
CONTROL WIRE HARNESS
O/Y
O/W
O/Bu
O/G
Viewed from terminal side
Normal
Normal
Abnormal
Replace or repair the control wire
harness.
GCU
Abnormal
Replace the inverter unit (P. 6-2).
2-22