Honda EU65is Mode D'emploi page 364

cap.11 EU65is 6500is 07.12.17 5:03 PM ページ11-5
4. GENERATOR
a. DISASSEMBLY
[1]
GENERATOR WIRE HARNESS
[8]
16 mm SPECIAL NUT
DISASSEMBLY:
Hold the rotor with a commercially
available strap wrench, loosen and
tighten the special nut.
[8]-1
STRAP WRENCH
(Commercially
available)
REASSEMBLY: P. 11-7
11-5
[2]
STATOR COLLAR B (2)
(DOUBLE NOTCHED)
[6]
6 x 78 mm
SOCKET BOLT (4)
[7]
ROTOR
DISASSEMBLY:
• Remove the rotor using a special tool flywheel
puller.
• Do not remove the rotor by tapping it with a
hammer.
[3]
WOODRUFF KEY
[4]
STATOR COLLAR A (2)
(SINGLE NOTCHED)
[5]
STATOR
[7]-1
FLYWHEEL PULLER
07935-8050004