Honda EU65is Mode D'emploi page 342

cap.09 EU65is 6500is 07.12.17 4:55 PM ページ9-3
c. REASSEMBLY
1) Insert the starter rope and into the recoil starter reel and tie
the rope as shown.
2) Wind the rope counterclockwise onto the reel.
3) Wind the spring and install it to the recoil starter reel by
aligning the outer end to the groove of the reel.
• Wear gloves and eye protection.
• During assembly, take care not to allow the return
spring to come out.
4) Apply grease to the spring hook and boss of the starter
case. Align the spring inner hook to the case claw on the
case by turning the reel counterclockwise.
5) Install the ratchet spring and ratchet as shown.
9-3
[1]
ROPE
[1]
STARTER REEL
[1]
STARTER CASE
[1]
RATCHET
[2]
RATCHET SPRING
[2]
STARTER REEL
[2]
RETURN
SPRING
[2]
STARTER REEL
[1]
RATCHET