Honda EU65is Mode D'emploi page 64

cap.02 EU65is 6500is (Eu).qxd 07.12.17 4:25 PM ページ2-17
E-01
(Starter motor switch input failure)
Check the fuse.
Check the ignition switch (P. 6-11).
Check the harness connecting the ignition switch and GCU for
open or short circuit and for proper connection.
Wire harness check points
ENGINE WIRE
HARNESS
Bl
Bl/Y
For remote control:
Check the wire harness connecting the remote control box and
GCU for open or short circuit and for proper connection.
Wire harness check points
GCU
IGNITION
SWITCH
(See
above)
Viewed from terminal side
Check the remote control box (P. 15-3).
Check the remote control harness for open or short circuit and
for proper connection.
Turn the ignition switch OFF and then restart the engine and
check the error code. If the same error occurs, replace the GCU
(P. 6-6).
2-17
Normal
Normal
CONTROL WIRE HARNESS
GCU
FUSE 1A
W/Y
G/O
W/Y
Bl/Y Bl/Y
FUSE 15A
Viewed from terminal side
CONTROL WIRE HARNESS
W/Bu
Br/Bu
Normal
Normal
Normal
Blown
Abnormal
Abnormal
Bl: BLACK
Y: YELLOW
G: GREEN
W: WHITE
O: ORANGE
IGNITION
SWITCH
REMOTE
CONTROL
HARNESS
Bu: BLUE
W: WHITE
Br: BROWN
Abnormal
Abnormal
Replace the fuse (P. 6-5).
Replace the ignition switch (P. 6-6
thru. 10)
Replace or repair the engine wire
harness and/or control wire
harness.
Replace or repair the remote
control box (P. 15-1 and 2).
Replace or repair the remote
control harness.