Honda EU65is Mode D'emploi page 280

cap.04 EU65is 6500is (Eu).qxd 07.12.17 4:46 PM ページ4-6
b. DISASSEMBLY/REASSEMBLY
• Before disassembly, loosen the drain screw and drain the
carburetor, and clean the outside of the carburetor.
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling fuel.
• Keep heat, sparks and flame away.
• Wipe up spills immediately.
• Handle fuel only outdoors.
[1]
3 x 8 mm SCREW WASHER (4)
0.9 N . m (0.1 kgf . m, 0.7 Ibf . ft)
4-6
WARNING
[2]
CONTROL MOTOR
(THROTTLE SIDE)
INSPECTION: P. 4-10
INSTALLATION: P. 4-8
[3]
CONTROL MOTOR
(CHOKE SIDE)
INSPECTION: P. 4-10
INSTALLATION: P. 4-8
[4]
FELT SEAL (2)
[5]
4 x 12 mm SCREW WASHER (2)
2.1 N . m (0.2 kgf . m, 1.5 Ibf . ft)
[6]
MOTOR BRACKET
[7]
COMPRESSION
COIL SPRING (2)
[8] LINK LEVER (2)