Angelo Po AT 61G Manuel D'utilisation page 72

ENGLISH
Percentage humidity or steam vent percentage
1) Press the zone to be edited.
2) To edit the highlighted value ("Percentage of humidity or
vent opening"), tap on the bar and turn the knob until the
relative value appears.
3) Press any point outside the zone to confi rm the hi-
ghlighted value.
Fan speed
1) Press the zone to be edited.
The following screen appears on the display.
2) Select one of the values on the display to increase or de-
crease the fan speed.
If the OFF value is selected, the cooling fan is set to inter-
mittent (the fan turns on and off automatically).
Cooldown
1) Press the zone to be edited.
The following screen appears on the display.
To edit the cooling temperature, rotate to increase or de-
crease until the relative value is displayed.
22
150
2) Press OK to confi rm the highlighted value.
Multi-Timer
1) Press the Multi-Timer zone to activate or deactivate the
Multi-Timer function ("Multi-Timer On/Off ").
Depending on the chosen function, the functioning status
appears in the "Multi-Timer" area ("Multi-Timer On" or "Multi-
Timer OFF").
The following screen appears on the display.
This screen allows you to:
– Add a new Timer
– Edit an existing Timer
– Eliminate all the Timers
USE AND OPERATION
3354462_ATG_ut_GB_rev.2