Angelo Po AT 61G Manuel D'utilisation page 279

REPLACING PARTS
To carry out this operation, proceed as follows.
1) Undo the screws to remove the side panel (A).
2) Open the fuse-holder (B) and replace the damaged fuse (C).
3) Replace the fuse-holder and the side panel when the operation is complete.
To carry out this operation, proceed as follows.
1) Loosen the screws of the lamp cover (A).
2) Remove the side panel (B).
3) Unscrew the screws to remove the lamp holder (C).
4) Extract and replace the lamp (D).
WARNING: During the procedure, take
care not to touch the lamp directly; wear protecti-
ve gloves if necessary.
5) Reassemble everything when the operation is
complete.
3354462_ATG_inst__GB_rev.2
REPLACING THE FUSE
C
B
CHANGING THE LAMP
A
A
C
ENGLISH
B
D
17