Angelo Po AT 61G Manuel D'utilisation page 53

SAFETY
A number of symbols have been used to highlight key sections of the text or important specifi -
cations. Their meaning is described below.
Hazard sign
Warning signs are classifi ed based on the danger level; failure to observe them results in the con-
sequent level of severity and probability of the event occurring.
Danger level
HAZARD
WARNING
ATTENTION
IMPORTANT
NOTE
Even if the equipment has all its safety devices, if necessary, during the installation and connection
other safety devices may be supplemented in accordance with applicable laws.
WARNING: Make a daily check that the safety devices are properly installed and in good
working order. Do not tamper with the safety devices in the points sealed and marked with
paint.
See chart at back of manual for the position of the signs provided.
HAZARDS AND SAFETY PROVISIONS DURING TRANSPORT
During transport of the appliance, watch out for the following hazards and provide for the countermea-
sures indicated below:
► Source of hazard: Handling of heavy loads
Hazard
Risk of injury due
to body overload
3354462_ATG_ut_GB_rev.2
SAFETY
HAZARD SIGN
Meaning
It warns of the potential risk of injury. Adhere to all the warnings in-
dicated by this symbol to avoid the risk of potential injury or death.
DISPLAY OF WARNING SIGNS
Severity level
Death/severe injury (irreversible)
Severe injury (irreversible)
Minor injury (irreversible)
Damage to appliances
It indicates particularly important information
which should not be overlooked
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
Where or in which situations
does the hazard occur?
• When the appliance moves
Countermeasures
• Use a suitable lifting device
• Observe the limit values for
lifting and transport
• Wear personal protective
equipment
ENGLISH
Likelihood
Very high
High
High
Medium
Safety device
• Protective gloves
• Protective shoes
• Safety helmet (e.g.
for suspended
loads, overhead
operations...)
3