ENGLISH
Hazard
Risk of electric
shock caused by live
components
Risk of electric
shock caused by live
parts
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING
When decommissioning the appliance, watch out for the following hazards and provide for the coun-
termeasures indicated below:
► Source of hazard: Electric power
Hazard
Risk of electric
shock caused by live
components
► Source of hazard: Handling of heavy loads
Hazard
Risk of injury due
to body overload
8
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
• On the appliance and on
the adjacent metal parts
• On the appliance and on the
adjacent metal accessories
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Where or in which situations
does the hazard occur?
When the appliance moves
Countermeasures
• Disable the power supply
before removing the pro-
tections
• Prevent the appliance from
being powered accidentally.
• Ensure that there is no voltage
• Before commissioning the
appliance, check that all
electric connections are not
damaged
• Use a power supply cable
with the specifi cations indi-
cated in section "Electrical
connection" of the installa-
tion manual.
• Before appliance commis-
sioning, check that electri-
cal connections are securely
fi xed
• Before commissioning, make
sure that the appliance and
its metal accessories are con-
nected to a system for equi-
potential bonding
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Turn off the power supply
before removing the covers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no volt-
age
Countermeasures
• Use a suitable lifting device
• observe the limit values for
lifting and transport
• Wear personal protective
equipment
SAFETY
Safety device
• Protection
panels
• System switch-
disconnector
Equipotential
bonding system
Safety device
• Protection pan-
els
• System
switch-
disconnector
Safety device
• Protective gloves
• Protective shoes
• Safety helmet (e.g.
for
suspended
loads,
overhead
operations...)
3354462_ATG_ut_GB_rev.2