Angelo Po AT 61G Manuel D'utilisation page 60

ENGLISH
To fi nd the specifi c topics of interest to you quickly, refer to the index at the start of the manual.
This manual contains all information necessary for general readers, i.e. for users of the appliance.
– The manufacturer has produced this manual, which forms an integral part of the appliance, to provide
the necessary information for those authorised to interact with it during its working life. As well as
adopting good practices for use, the manual's intended readers must read it thoroughly and apply its
instructions to the letter.
– This information is provided by the manufacturer in the original language (Italian) and is translated
into other languages to meet legal and/or business requirements. Reading this information will avoid
health and safety risks to people and fi nancial losses.
– Keep this manual in a clearly identifi ed safe place throughout the working life of the appliance, so that
it will always be available when required for consultation.
– The manufacturer reserves the right to make changes without any obligation to provide any prior
notice.
IDENTIFICATION OF MANUFACTURER AND APPLIANCE
The nameplates shown here are fi tted directly to
the appliance.
One (fi g. 1) contains references and all essential
information for operating safety, and the other
(fi g. 2) the information about the gases for each
country of use.
A) Appliance model
B) Type of customisation
C) Manufacturer identifi cation
D) Type of fume exhaust vent
E) Serial number
F) Protection rating
G) EC conformity mark
H) Reference standard
10
GENERAL INFORMATION
INSTRUCTIONS AND WARNINGS FOR THE READER
PURPOSE OF THE MANUAL
L) EC certifi cate number
M) Product family type
N) Gas pressure
P) Appliance category
Q) Gas consumption
R) Rated power (kW)
S) Type of gas
T) Testing gas indicator frame
U) Code of country of destination
V) Date of construction
W) Voltage (V)
X) Frequency (Hz)
Y) Rated power (kW)
Z) Injector diamete
GENERAL INFORMATION
3354462_ATG_ut_GB_rev.2