Angelo Po AT 61G Manuel D'utilisation page 65

USE AND OPERATION
The illustration shows the appliance's control panels,
while the list details the descriptions and functions of
the individual controls.
A) Touch screen display: it displays the work pa-
rameters and the alarm codes and is used to select
the relative function or to change the values.
B) Knob: Used to select the function required or
modify values.
– Clockwise: scrolls the zones "downwards or to
the right" or increases the highlighted value.
– Anticlockwise: scrolls the zones "upwards or to
the left" or decreases the highlighted value.
After selecting the function required or the value,
press the knob to confi rm and save the function or
value.
C) On/off button: turns the appliance's electricity
supply on and off (in models AT201 and AT202 the
power button is located on the left hand side of the
control panel).
D) USB port: used to connect a remote data storage
unit to the appliance.
E) Connector for optional probe or vacuum probe
(accessory on request).
F) Loudspeaker: reproduces the sound signals.
Proceed as follows.
Lighting
1) Operate the appliance's master switch to connect it
to the electrical mains.
2) Turn on the gas supply tap.
3) Turn on the water supply tap.
4) Press button (C) to switch on the appliance.
3354462_ATG_ut_GB_rev.2
DESCRIPTION OF CONTROLS
SWITCHING THE APPLIANCE ON AND OFF
E
A
B
D F
C
A
C
ENGLISH
15