Publicité
removing the Airbag and all the other electronic components integrated inside the Base
Layer (1) (see Figure 17). So, as you lift up the Gas Inflators Housing (13), you will see that
you have full access to be able to remove the entire Airbag. You may now start removing
the Airbag from the Base Layer (1) by gently pulling on the Airbag until it is completely
removed from the Base Layer (1).
Figure 16: How to Detach the Gas Inflators Housing (13) from the System
Figure 17: How to remove the airbag and all the electronic components from the rear of the System
34 EN
Publicité
