Beurer IH 21 Mode D'emploi page 18

Particle size diagram
Measurements were performed using a sodium fluoride solution
with a "Next Generation Impactor" (NGI).
This diagram may not be applicable for suspensions or highly
viscous medicines. More information can be obtained from the
relevant medicine manufacturer.
12. REPLACEMENT PARTS AND WEA-
RING PARTS
Designation
Yearpack (contains Mouthpiece,
Nosepiece, Adult mask, Child
mask, Atomiser, Compressed air
hose, Filter)
Nasal douche
Baby mask
If the unit is used outside of the specifications, proper
function is no longer guaranteed!
We reserve the right to make technical changes to improve
and further develop the product.
This device and its accessories comply with European
standards EN60601-1 and EN60601-1-2 (CISPR 11,
IEC61000-3-2, IEC61000-3-3, IEC61000-4-2, IEC61000-4-
3, IEC61000-4-4, EC61000-4-5, IEC61000-4-6, IEC61000-
4-7, IEC61000-4-8, IEC61000-4-11), as well as EN13544-
1, and is subject to special safety measures in terms of
electromagnetic tolerance. The unit conforms to the requi-
rements of the European Directive for Medical Products
93/42/EEC, the MPG (German Medical units Act).
Notes on electromagnetic compatibility
• The device is suitable for use in all environments listed in
these instructions for use, including domestic environments.
• The use of the device may be limited in the presence of elec-
tromagnetic disturbances. This could result in issues such as
error messages or the failure of the display/device.
• Avoid using this device directly next to other devices or sta-
cked on top of other devices, as this could lead to faulty ope-
ration. If, however, it is necessary to use the device in the
manner stated, this device as well as the other devices must
be monitored to ensure they are working properly.
• The use of accessories other than those specified or provided
by the manufacturer of this device can lead to an increase
in electromagnetic emissions or a decrease in the device's
electromagnetic immunity; this can result in faulty operation.
13. WARRANTY / SERVICE
Further information on the guarantee and guarantee conditions
can be found in the guarantee leaflet supplied.
Material REF
PP/ PVC 601.22
PP 601.37
PVC 601.31
18