Helios FU Comfort Sinus Manuel De Montage Et D'utilisation page 251

Installation and Operating Specification FU Comfort Sinus
2.Heating
(9K)
2.Cooling
(10K)
Limits GW E1 and GW E2
Function
OFF
Fault
(1L)
Message
(2L)
Filter error
(3L)
Filter Message
(4L)
PINs
PIN
PIN 0010
PIN 1020
PIN 1234
PIN 9090
PIN 9091
PIN 9095
L-BAL-E304-GB 2004
Heating function
Switch ON point: temperature = Setpoint +/- Offset
Switch OFF point: Temperature around hysteresis over switch ON point
Cooling function
Switch ON point: temperature = Setpoint +/- Offset
Switch OFF point: Temperature around hysteresis below switch ON point
Description function GW E1, GW E2
no function
Indication with the centralized fault of a programmed relay (IO allocation Function
Warning symbol in display, "AL" code in events memory.
Is merely displayed in the events menu as message "msg".
| |
with fault message "Filter"
Like function 1L
| |
with fault message "Filter"
Like function 2L
Function
Opening service menu, if PIN-protection activated
Reactivate wizard for first-time start-up
Freischalten Menu group "Setting"
If "Set protection" = "ON" (see Controller Setup)
Restore user setting
Save user setting (corresponds function "Save user setup" = "ON"see Controller Setup)
Restore factory setting = delivery status
Part.-No.
112/139
Menu tables
| |
2K ).