Setting Of Time And Date; Automatic Summer Time - Helios FU Comfort Sinus Manuel De Montage Et D'utilisation

Installation and Operating Specification FU Comfort Sinus
Function
Control/Manual
(7D)
Heating/Cooling
(8D)
1.Setp+Pband1/2
(15D)
E1 / E2
(4D)
2. Setpoint 1/2
(9D)
2.Setp+Pband1/2
(16D)
* Detailed description see IO Setup / Digital Inputs "D1" / "D2"
9.12.2

Setting of time and date

Main menu
Controller Setup
IO Setup
Limit
Timer
Autoadressing
Timer
13:05
Time
Timer
09.04.13
Date
9.12.3

Automatic summer time

The summertime automatic is factory set to "OFF", i.e. switched off. When the summertime automatic
is activated the device automatically switches between daylight saving time and wintertime.
"North" = for countries in the Northern Hemisphere.
"South" = for countries in the Southern Hemisphere.
L-BAL-E304-GB 2004
Description *
Switch over "automatic control" / "Speed manual"
Possible only for operation with one control circuit!
Switch over control function (e.g. "heating" / "cooling")
for control circuit 1: Switch over Setpoint 1/2 and Pband 1/1
When programming this function, "Setting" additionally lists
the parameter: "1.Pband 1. for control circuit 1"
Only active in operation with a second control circuit
The output for control circuit 2 is additionally set to "A2" to
"A1" (regardless of the programmed function for "A1"). The
first control circuit has no output for the duration of the switch
over.
The switch over input "E1" / "E2" as in operation with one
control circuit is no longer possible.
for control circuit 2: Switch over "2. Setpoint 1" / "2. Setpoint
2"
for control circuit 2: Switch over Setpoint 1/2 and Pband 1/2
When programming this function, "Setting" additionally lists
the parameter: "2.Pband 2 for control circuit 2"
Menu group timer
Press the P-key and set the hours with the UP / DOWN keys, press the P-key to save.
Now the minutes flash and can be set with the UP / DOWN keys, press the P-key to
save.
To set the date follow the same method as for "Time". The date setting consists of day,
month and year
Example for: 9. April 2013
Part.-No.
96/139
Programming
Timer ON =
(@ Timer Invert. = OFF)
Manual mode
Reversal standard
First control circuit Set-
point 2 + Pband 2
Second control circuit to
A1 + A2
Second control circuit
Setpoint 2
Second control circuit
Setpoint 2 + Pband 2