Cable Inlet - Helios FU Comfort Sinus Manuel De Montage Et D'utilisation

Installation and Operating Specification FU Comfort Sinus
Type FU-CS8...18 (FU-CS22)
Fastening at 4 points
Drill fastening points "1" - "4".
"
Fasten device with screws.
"
Type FU-CS32...50
Fastening at 8 points
Drill 8 fastening points.
"
Screw in fastening point screws "1" - "4" up to a distance of approx. 5 mm and mount the device.
"
Tighten fastening point screws "1" - "4"
"
Screw in fastening point screws "5" - "8" and tighten.
"
4.4

Cable inlet

Remove the terminal compartment cover.
"
Depending on the housing model cut off necessary cable inlets respectively to the cable diameter.
"
Or alternative use cable inlet for cable glands. Metal sheet housings are supplied with stoppers.
Any cable ducts openings not used must be sealed!
Strip and insert the cables properly.
"
Attach cover for terminal compartment again carefully before start-up.
"
L-BAL-E304-GB 2004
1
4
1
5
8
4
Part.-No.
2
3
2
6
7
3
12/139
Mounting
GM00005A_M
15.12.2015
GM00002A_M
15.12.2015