Helios FU Comfort Sinus Manuel De Montage Et D'utilisation page 202

Installation and Operating Specification FU Comfort Sinus
Example: Assignment of inputs for temperature sensors
1 Overview display of virtual inputs "AI1-AI6" with display of actual values and programmed functions
2 Assignment of actual input "E1" on FU-CS master to virtual input "AI1"
3 Assignment of actual input "E2" on FU-CS master to virtual input "AI2"
4 Assignment of actual input "E1" on IO extension to virtual input "AI3"
Assignment of IOs and display of designations
With the factory default assignment, the designations of the inputs and outputs in the display
correspond to the connection designations (see circuit board and connection diagram imprint).
If you make a different assignment, e.g. assigning the input "E2" instead of the previous hardware
input "E1" under "AI1" (analog input 1), the display and setting is still under "E1". In other words, the
designation of the connection and the designation in the display no longer match.
L-BAL-E304-GB 2004 Part.-No.
63/139
Programming