Helios FU Comfort Sinus Manuel De Montage Et D'utilisation page 209

Installation and Operating Specification FU Comfort Sinus
Function
Ext. Setpoint
(1E)
Ext. Manual mode
(2E)
Measurement
(7E)
Outdoor temperature
(15E)
Factory assignments: Virtual inputs / actual inputs
Virtual input
Signal settings
AI1
OFF
Inverting
L-BAL-E304-GB 2004
Description Function
For modes as controller higher
| |
= External Setpoint e.g. via external signal (0 - 10 V) instead of "Setpoint 1"
1E
External manual operation via external signal (0 - 10 V). Switch over between settings
on the device and external manual operation via digital input.
Measurement value e.g. Measurement value e.g. for limit indication, display in Info
menu "E2 Actual".
without function!
Real input
AI1
AI2
AI3
AI4
AI5
AI6
After programming the signal or sensor type, an inversion of the inputs can be carried
out.
Factory setting for Inverting inputs = "OFF" (if input activated) (signal: 0 - 10 V, 0 -
20 mA, 4 - 20 mA).
For activation using inverted default signals or sensors with inverted output signals
proportional to the measurement range, switch inverting to "ON" (Signal: 10 - 0 V, 20 -
0 mA, 20 - 4 mA).
Explanation
E1
E1 FU-CS
Signal
E2
E2 FU-CS
Signal
not available
n.a.
(no input assigned)
not available
n.a.
(no input assigned)
not available
n.a.
(no input assigned)
not available
n.a.
(no input assigned)
Part.-No.
70/139
Programming
2.01