For Mode 2.03 : Relay Output For Heating Or Cooling - Helios FU Comfort Sinus Manuel De Montage Et D'utilisation

Installation and Operating Specification FU Comfort Sinus
Setting
2.0 K
Pband AnalogOut
Setting
0 %
Min. AnalogOut
Setting
100 %
Max. AnalogOut
Example for signal out 0 - 10 V (IO Setup: "A2 function" =
Example: Setpoint ventilation 25.0°C, Offset -5.0 K, Pband 10.0 K
S Setpoint Ventilation +/- Offset
R Pband
I Actual value
9.2.5 For mode 2.03
Setting
-1.0 K
OffsetDigitalOut
Setting
1.0 K
Hyst.DigitalOut
Temperature variation with factory setting
If the ambient temperature is lower than the set operating point, the heating remains switched on. If
the ambient temperature exceeds the set operating point of the heating by 2 K (Kelvin), the heating is
switched off. I.e., the release point is situated at the hysteresis value over the operating point.
L-BAL-E304-GB 2004
Pband AnalogOut
Pband AnalogOut = separately adjustable range of control (P-band) for 0 - 10 V output
Setting range: 0...200.0 K
Factory setting: 2.0 K
Min. AnalogOut
Min. AnalogOut = Minimal output voltage
Setting range: 0...100 % = 0 - 10 V
Factory setting: 0 %
Max. AnalogOut
Max. AnalogOut = Maximal output voltage
Setting range: 100...0 % = 10 - 0 V
Factory setting: 100 %
10 V
100 %
Max. Analog Out
50 %
Min. Analog Out
20 °C
S
: Relay output for Heating or Cooling
OffsetDigitalOut
Offset Digital Out = Offset for relay output ("K2" is pre-programmed by the factory).
The relay operating point deviates by the adjusted offset of the Setpoint of the ventila-
tion (if relay "K2" not inverted, terminal "21"-"24" bridged).
Setting range: -10.0...+10.0 K
Factory setting: -1.0 K
•
"0.0 K"
set, i.e. heating
•
During negative offset value heating
•
During positive offset value heating
Hyst.DigitalOut
Switching hysteresis of the relay
Setting range: 0...10,0 K, Factory setting: 1.0 K (Kelvin)
Part.-No.
| |
6A )
Min. 0 %
Min. 35 %
10 K 30 °C
R
"ON"
when: actual value = Setpoint
"ON"
when: actual value = Setpoint - offset
"ON"
when: actual value = Setpoint + offset
| |
9K in IO Setup e. g. for controlling a Heating.
39/139
Programming
Max. = 100 %
Max. = 85 %
I
09.05.2007
v_signal_ausgang_0_10_v.vsd