Helios FU Comfort Sinus Manuel De Montage Et D'utilisation page 224

Installation and Operating Specification FU Comfort Sinus
Limit
- - - - -
Lmt E1Del.
Information
Always adjust the value for the maximum input signal higher than the value for the minimum input
signal!
E1 Max. > E1 Min.
Example for a limit indication of default signal or sensor signal to "Analog In 1"
1
2
3
Terminal "E1" and "GND" alarm via relay "K1" (non-inverted) IO Setup → K1 function:
indicators
L-BAL-E304-GB 2004
E1 Delay
Time delay until indication through relay and alarm symbol.
Setting range: 0 - 120 sec.
Factory setting: 2 sec.
1
0
50 %
1
0
50 %
1
0
50 %
Analog IN
11.05.2007
100 %
v_grenzwert_signal_k1_1.vsd
Analog IN
100 % 11.05.2007
v_grenzwert_signal_k1_2.vsd
Analog IN
100 % 11.05.2007
v_grenzwert_signal_k1_3.vsd
Part.-No.
85/139
Programming
Settings
- E1 Max.: 80 %
- E1 Min.: OFF
- switching hysteresis 5 % (from
100 %)
Settings
- E1 Min.: 20 %
- E1 Max.: OFF
- switching hysteresis 5 % (from
100 %)
Settings
- E1 Min.: 20 %
- E1 Max.: 80 %
- switching hysteresis 5 % (from
100 %)
| |
5 K = limit