Com2 Function; Data On The Total Control Deviation; Io Setup; Overview Menu Group Io Setup - Helios FU Comfort Sinus Manuel De Montage Et D'utilisation

Installation and Operating Specification FU Comfort Sinus
9.8.13

COM2 Function

IO Setup

MODBUS Slave
COM2 Function
9.8.14

Data on the total control deviation

The total control deviation is comprised of the sum of the control deviations for performance quantities
and work quantities combined and refers to the specified areas.
In direct reference to the acquired input and controlled variables, the maximum deviation to the target
value is < ± 5 %. By activating the menu-assisted adjustment, the total control deviation can be
reduced to a value of < ± 1 %.
For indirect reference of the acquired input value to the controlled variable, i.e., two physical variables
still need to be converted, the deviation can be reduced to < ± 5 % through adjustment.
In the case of an internal default value through the integrated or external terminal, the control deviation
remains at < ±0.5%.
9.9 IO Setup
9.9.1

overview Menu group IO Setup

Main menu
Settings
Protocol
Base setup
Controller Setup
IO Setup
IO Setup
Analog Out
Analog In
Digital Out
Digital In
L-BAL-E304-GB 2004
Controller 1
C1
Sensor 2
Controller 2
C2
Sensor 1
Cout = C1 @ C1 > C2
Cout = C2 @ C2 > C1
Possible settings:
•
MODBUS Slave (factory setting): In the main menu the
"MODBUS Slave"
followed by the
can be set in this.
• "MODBUS Slave"
OFF: The
the main menu.
•
MODEM SMS: In the main menu the
"MODEM SMS"
menu group. Input
function at present).
IO Setup
The IO setup consists of 4 areas:
Analog outputs
Analog inputs
Digital outputs
Digital inputs
Part.-No.
61/139
U
Comparator
V
W
Cout
A
20.08.2014
v_comparator_c1_c2.vsd
menu group. The communication parameters
"MODEM SMS"
or
"IO Setup"
SIM
PIN for MODEM
Programming
"Diagnostic"
menu group is
menu group is not displayed in
menu group is followed by the
SMS
interface (no