Analog Output "Ao - Helios FU Comfort Sinus Manuel De Montage Et D'utilisation

Installation and Operating Specification FU Comfort Sinus
9.9.3

Analog output "AO"

Menu structure
Analog Out
AO1 (10.00V, 1A)
AO2 (OFF)
AO3 (OFF)
AO4 (OFF)
AO5 (OFF)
AO1
Constant voltage 10 V
AO1
AO1
AO1
AO1
Invertierung
Overview of possible analog outputs
Analog Out
AO1 (10.00V, 1A)
AO2 (Check Sig-
nal)
AO3 (OFF)
AO4 (OFF)
AO5 (OFF)
AO6 (OFF)
L-BAL-E304-GB 2004
▲
▼
P↓ ↑ ESC
P
(1A)
▲ ▼
Function
▲ ▼
A1 P
Signal
▲ ▼
▲ ▼
0.0 V P
Min.
▲ ▼
▲ ▼
10.0 V P
Max.
▲ ▼
▲ ▼
OFF P
▲ ▼
Example to explain the display
10.00V = Current output voltage at "AO1".
1A = Programmed function (fixed voltage 10V) for "AO1"
"Check Signal"
It means the output is assigned a function, but an actual output is not provided.
OFF = No function assigned
OFF = No function assigned
OFF = No function assigned
OFF = No function assigned
Overview of possible analog
outputs
Setting of the desired function
Assignment: virtual output / ac-
tual output
Setting minimal output voltage
Setting maximal output voltage
Inverting output
Part.-No.
65/139
Programming