Aventics RMC Mode D'emploi page 44

42 AVENTICS | RCM | R402002349-BDL-001-AC
For your safety
In service
Maintenance
Waste disposal
In certain applications and installation arrangements there
may be a risk of crush injuries. Always follow the site safety
instructions.
If the RMC-Zylinder is not properly secured, people may be
injured or other parts of the system may be damaged because
parts move uncontrollably or become detached. Check
carefully that the RMC-Zylinder and any connected parts of the
system are properly secured.
Where the unit is installed vertically, a suspended load may
drop if the compressed air is shut off. This may result in injury.
Always secure the area under a suspended load.
Never use solvents or strong detergents. Never hose down the
RMC-Zylinder with water. Clean the RMC-Zylinder only with a
cloth slightly moistened with water or a mild detergent.
Dispose of the device in accordance with local regulations.