Publicité
SWINGARM
8. Install:
9 Bolt (connecting rod) 1
9 Plain washer 2
9 Nut (connecting rod) 3
NOTE:
9 Apply the molybdenum disulfide grease on the
bolt.
9 Do not tighten the nut yet.
9. Install:
9 Bolt (rear shock absorber-relay arm) 1
9 Nut (rear shock absorber-relay arm) 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
10. Tighten:
9 Nut (connecting rod) 1
11. Tighten:
9 Nut (relay arm) 1
12. Install:
9 Cap 1
NOTE:
Install the cap (right) with its mark a facing for-
ward.
5-59
CHAS
53 Nm (5.3 m•kg, 38 ft•lb)
80 Nm (8.0 m•kg, 58 ft•lb)
80 Nm (8.0 m•kg, 58 ft•lb)
Publicité
