Publicité
FRONT WHEEL AND REAR WHEEL
EC5251A1
Rear wheel
1. Install:
9 Bearing (right) 1
9 Circlip 2
9 Spacer 3
9 Bearing (left) 4
9 Oil seal 5
NOTE:
9 Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
9 Install the bearing with seal facing outward.
9 Use a socket that matches the outside diam-
eter of the race of the bearing.
9 Right side of bearing shall be installed first.
9 Install the oil seal with its manufacture's
marks or numbers facing outward.
cC
Do not strike the inner race of the bearing.
Contact should be made only with the out-
er race.
2. Install:
9 Brake disc 1
9 Bolt (brake disc) 2
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
5-7
CHAS
14 Nm (1.4 m•kg, 10 ft•lb)
Publicité
