Publicité
YPVS GOVERNOR
2. Install:
9 Ball 1
9 Retainer 2
To governor shaft 3.
NOTE:
Apply the transmission oil on the retainer and
ball.
3. Install:
9 Dowel pin 1
NOTE:
9 While compressing the spring, install the dowel
pin.
9 Make sure the dowel pin fits into the groove a
in the retainer.
4. Install:
9 Governor assembly 1
NOTE:
Align the groove a in the governor with the fork
b and set the governor in the crankcase cover.
4-51
ENG
Publicité
