Publicité
EC560000
STEERING
4Nm (0.4 m•kg, 2.9 ft•lb)
Extent of removal:
Extent of removal
Preparation for
removal
1
2
20 Nm (2.0 m•kg, 14 ft•lb)
1 Under bracket removal 2 Bearing removal
Order
Part name
STEERING REMOVAL
Hold the machine by placing the
suitable stand under the engine.
Number plate
Handlebar
Front fender
1
Steering shaft cap
2
Steering shaft nut
3
Front fork
4
Handle crown
5
Ring nut
6
Under bracket
7
Bearing race cover
8
Bearing (upper)
9
Bearing (lower)
10
Bearing race
STEERING
145 Nm (14.5 m•kg, 105 ft•lb)
Q'ty
w
Support the machine securely so there is no dan-
ger of it falling over.
Refer to "HANDLEBAR" section.
1
1
2
Refer to "FRONT FORK" section.
1
1
Use special tool.
Refer to "REMOVAL POINTS".
1
1
1
1
Refer to "REMOVAL POINTS".
2
Refer to "REMOVAL POINTS".
5-48
CHAS
23 Nm (2.3 m•kg, 17 ft•lb)
TIGHTENING STEPS:
9 Tighten ring nut.
38 Nm (3.8 m•kg, 27 ft•lb)
9 Loosen it one turn.
9 Retighten it.
7 Nm (0.7 m•kg, 5.1 ft•lb)
Remarks
Publicité
