Publicité
CLUTCH AND PRIMARY DRIVEN GEAR
å
∫
EC495230
Clutch
1. Install:
9 Thrust plate [D=ø 42 mm (1.65 in)] 1
9 Spacer 2
9 Bearing 3
9 Primary driven gear 4
NOTE:
Apply the transmission oil on the bearing, spacer
and primary driven gear inner circumference.
2. Install:
9 Thrust plate [D=ø 44 mm (1.73 in)] 1
9 Clutch boss 2
3. Install:
9 Lock washer 1
9 Nut (clutch boss) 2
NOTE:
Use the clutch holding tool 3, 4 to hold the
clutch boss.
Clutch holding tool:
YM-91042 ..............................3 3
90890-04086..........................4 4
å For USA and CDN
∫ Except for USA and CDN
4. Bend the lock washer 1 tab.
4-37
ENG
75 Nm (7.5 m•kg, 54 ft•lb)
Publicité
