Yamaha WR250F Manuel D'atelier page 438

All manuals and user guides at all-guides.com
4 - 86
ENGINE REMOVAL
2. Install:
Lock washer 1
Nut (drive sprocket) 2
75 Nm (7.5 m · kg, 54 ft · lb)
NOTE:
Tighten the nut while applying the rear brake.
3. Bend the lock washer tab to lock the nut.
4. Install:
Drive chain sprocket guide 1
Drive chain sprocket cover 2
Screw (drive chain sprocket cover) 3
8 Nm (0.8 m · kg, 5.8 ft · lb)
Oil hose and neutral switch
1. Install:
O-ring 1
Dowel pin 2
Oil hose 3
Bolt (oil hose) 4
10 Nm (1.0 m · kg, 7.2 ft · lb)
NOTE:
Apply the lithium soap base grease on the O-
ring.
2. Install:
Spring 1
Pin 2
O-ring 3
Neutral switch 4
Bolt (neutral switch) 5
4 Nm (0.4 m · kg, 2.9 ft · lb)
NOTE:
Apply the lithium soap base grease on the O-
ring.
ENG