Yamaha WR250F Manuel D'atelier page 376

All manuals and user guides at all-guides.com
4 - 55
CLUTCH
7. Install:
Push rod 2 1
Ball 2
Push rod 1 3
NOTE:
Apply the engine oil on the push rod 1, 2 and
ball.
8. Install:
Pressure plate 1
9. Install:
Clutch spring 1
Bolt (clutch spring) 2
8 Nm (0.8 m · kg, 5.8 ft · lb)
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
10. Install:
Dowel pin 1
Gasket (clutch cover) 2
11. Install:
Clutch cover 1
Bolt (clutch cover)
10 Nm (1.0 m · kg, 7.2 ft · lb)
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
ENG