Yamaha WR250F Manuel D'atelier page 426

All manuals and user guides at all-guides.com
4 - 80
CDI MAGNETO
EC4L5000
ASSEMBLY AND INSTALLATION
CDI magneto
1. Install:
Stator 1
Screw (stator) 2
10 Nm (1.0 m · kg, 7.2 ft · lb)
NOTE:
Apply the sealant on the grommet of the CDI
magneto lead.
Tighten the screws using the T30 bit.
®
Quick gasket
ACC-QUICK-GS-KT
YAMAHA Bond No. 1215:
90890-85505
2. Install:
Woodruff key 1
Rotor 2
NOTE:
Clean the tapered portions of the crankshaft
and rotor.
When installing the woodruff key, make sure
that its flat surface a is in parallel with the
crankshaft center line b.
When installing the rotor, align the keyway c
of the rotor with the woodruff key.
3. Install:
Washer 1
Nut (rotor) 2
48 Nm (4.8 m · kg, 35 ft · lb)
Use the rotor holding tool 3.
Rotor holding tool:
YU-1235/90890-01235
ENG
: