Pre-Op Instructions - Boston Scientific Precision Manuel

Pre-Op Instructions

1. Ensure that the IPG is fully charged prior to
the permanent implant procedure. The ap-
proximate location of the IPG is marked on
the IPG kit. Turn on the Charger and place
it over the IPG to begin charging.
2. Check that the sterile package is intact.
(See "Sterilization, Handling, and Storage"
page 17.)
3. Ensure that a Trial Stimulator is available
for use. Install a new battery in the Trial
Stimulator.
4. Be sure the Trial Stimulator and Remote
Control stimulation settings have been re-
set. (See "Device Linking" page 46.)
5. For trial procedures, ensure that a Patient
Trial Kit is available, proceed to "Percu-
taneous Lead Placement in the Epidural
Space" page 20.
6. For permanent IPG implantation, proceed
to "Removal of Trial Leads, Extensions,
and Splitters" page 33.
Pre-Op Instructions
Clinician Manual
90607862-22 Rev A 19 of 303