Clinician Options - Boston Scientific Precision Manuel

Precision™ Spinal Cord Stimulator System Clinician Manual
message indicating no response. Press
retry searching or press

Clinician Options

Additional clinician functions are available on
the Remote Control. These functions include:
• Communication with the clinician
programmer
• Electrode impedance monitoring
• Linking the Remote Control and
Stimulator
• Language selection
To access the Clinician Options menu:
P
1. Press the and buttons simultaneously
"
for three seconds. The Clinician Options
menu will appear.
2. Press the p or q button to navigate the
Clinician Options menu.
Clinician Manual
90607862-22 Rev A
P
to
to cancel.
"
48 of 303
3. Each option is discussed below.
Selection #1 – CP Mode
1. From the Clinician Options menu, highlight
"CP Mode" and press the
lect this menu item. This will prepare the
Remote Control for communication with
the Clinician Programmer (CP). When in
CP Mode, "CP Ready" will appear on the
Remote Control screen.
2. Place the Remote Control and the IR
dongle in the plastic IR Holder so that
their communication ports are facing each
other.
3. Plug the dongle's USB connector into the
appropriate connector on the CP.
4. Launch the BionicNavigator software and
wait for the "Communication Established"
message.
P
button to se-