Boston Scientific Precision Manuel page 44

Precision™ Spinal Cord Stimulator System Clinician Manual
Stimulator Battery Status
The Level screen also displays the Stimulator
battery status in the top center of the screen.
Three solid bars represent a fully charged
Stimulator. As the Stimulator battery depletes,
depending on the patient's stimulation
settings and usage, the bars will "empty"
accordingly. For their convenience, patients
are encouraged to recharge the Stimulator at
the first "Recharge Battery Soon" message
displayed by the Remote Control. Due to
Zero Volt™ Technology, the Stimulator can be
completely and repeatedly discharged without
causing battery failure.
Program Selection and Activation
Note: The program that is currently or
was most recently running will be
underlined ( _ ). Empty program slots
are denoted by an empty box [ ] with
no program number.
P
1. Press the button from the Level screen
to go to the Program selection screen. Pro-
gram 1 will be highlighted.
2. From the Program selection screen, press
P
the button to highlight the next program
number. Press the
previous program number. Pressing the
Clinician Manual
90607862-22 Rev A
button to select the
"
P
44 of 303
button from program 4 or the
program 1 returns to the Level screen.
3. Highlight the desired program and press
p to activate the program.
Modifying and Saving Programs
If the stimulation amplitude, pulse width, or
rate (see "Additional Area Options" page 46)
have been changed, the new settings can be
saved by following the instructions below.
P
1. Press once to access the Program se-
lection screen, and then press
ed to highlight the desired program.
Note: Typically, patients will want to highlight
the currently running program.
This program is underlined (__).
Highlighting the underlined program
will save the new settings to the
currently running program.
button from
"
P
as need-