Boston Scientific Precision Manuel page 65

Determining Longevity:
1. Fit the Precision system to patient, make
note of the amplitude, rate and pulse
width for each of the areas. For multi-area
stimulation please use the Multiple-Area
Battery-Longevity Worksheet.
2. In the following chart, look up the battery-
longevity based on the amplitude, rate and
pulse width values that correspond most
closely to the settings from step 1. (Inter-
polation may be used for improved accu-
racy.) The battery-longevity projections are
given in years and represent the longevity
of a typical Precision battery when used
continuously. If the rechargeable Stimula-
tor battery is not used continuously, the
battery-longevity should be greater than
the value given.
Note: • Cells in the table that are marked
with an "*" represent stimulation
settings that cannot be attained with
the Precision System. Interpolation
between a cell with an "*" and
another cell is not possible.
• The longevity and recharge interval
estimates in this document were
generated using projections of
typical results based on Boston
Scientific's internal testing data.
Actual results may vary.
Clinician Manual
90607862-22 Rev A
Appendix
65 of 303