Maintenance Every 40 Working Hours - eurosteel CW.00 Manuel D'utilisation

USER MANUAL
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
TRANSLATION FROM DUTCH ORIGINAL

6.1.3 MAINTENANCE EVERY 40 WORKING HOURS

1. Before starting preventive maintenance, read instructions 1 to 7 in Section 6.
2. Check the clearance between the adapter plates of the attachments used and the front shaft of the CW
quick coupler. Any clearance between the adapter plates and the front shaft will take the form of the
red zone indicated by A in Figure 36
attachments and/or the CW quick coupler if the clearance is greater than the values given in Table 8.
A
Figure 36
TYPE: MAXIMUM PERMITTED
CW QUICK CLEARANCE A (MM)
COUPLER
CW.00 1
CW.0 1
CW.1 1
CW.1-350 1
CW.2 2
CW.2-S 2
CW.3 2
CW.3-S 2
Table 8
Eurosteel BV Van Heemskerckweg 10 5928 LL Venlo The Netherlands +31 (0)77 387 60 60 www.eurosteel.nl
.
The maximum total permitted clearance is given in Table 8
TYPE OF CW QUICK
COUPLER
CW.4 (HD)
CW.4-S
CW.45
CW.45-S
CW.55
CW.55-S
CW.70
- 81 -
- 81 -
.
Repair
MAXIMUM PERMITTED
CLEARANCE A (MM)
2
2
2
2
2
2
2