eurosteel CW.00 Manuel D'utilisation page 72

USER MANUAL
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
TRANSLATION FROM DUTCH ORIGINAL
11B. Spindle version
Lock the attachment by turning the spindle until the wedge is locked in the position as shown in Figure
24. Tighten the spindle to the torque specified in Table 7. Then place and tighten the locking bolt (see
Section 1.3.3) and go to step 12.
TYPE OF CW
QUICK
COUPLER
CW.0
CW.1 (-350)
CW.2 (-S)
CW.3 (-S)
CW.4 (HD) (-S)
CW.45 (-S)
CW.55 (-S)
Table 7
Figure 24
Eurosteel BV Van Heemskerckweg 10 5928 LL Venlo The Netherlands +31 (0)77 387 60 60 www.eurosteel.nl
SPANNER SIZE TIGHTENING
FOR SPINDLE TORQUE (Nm)
AND LOCK
BOLT
10 110
24 110
30 250
30 250
30 250
41 360
41 360
- 70 -
- 70 -