Overview Of Components And Versions; Hydraulic (H) Version; Mechanical (M) Version; Spindle (S) Version - eurosteel CW.00 Manuel D'utilisation

USER MANUAL
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
TRANSLATION FROM DUTCH ORIGINAL

1.3 OVERVIEW OF COMPONENTS AND VERSIONS

1. Machine-specific attachment point for the arm. In the case of
a CW quick coupler adapter, this is where the front coupling
point is located.
2. Machine-specific attachment point for the H-link. In the case
of a CW quick coupler adapter, this is where the rear
coupling point is located.
3. Optional lifting hook.
4. Front shaft for mounting attachment
5. Rear shaft for mounting attachment
6. Wedge retainers (2x).
7. Locking wedge to lock the attachment
8. Optional grapple suspension.

1.3.1 HYDRAULIC (H) VERSION

9. Spring guide (2x).
10. Springs (2x) to maintain tension on the locking wedge.
11. Hydraulic cylinder for operating the locking wedge.

1.3.2 MECHANICAL (M) VERSION

12. Mechanical screw connection (1 or 2 bolts depending on the
version) for locking the locking wedge.

1.3.3 SPINDLE (S) VERSION

13. Spindle for locking and unlocking the locking wedge.
14. Locking bolt for securing the spindle.
The images shown in Figure 3 are parts from a CW3 quick coupler. If
you do not recognise the parts for your CW quick coupler, contact
Eurosteel BV for a parts drawing of your CW quick coupler model.
Eurosteel BV Van Heemskerckweg 10 5928 LL Venlo The Netherlands +31 (0)77 387 60 60 www.eurosteel.nl
1
4
8
9
7
12
7
13
- 49 -
- 49 -
2 3
5 6 7
10 11
14
Figure 3