eurosteel CW.00 Manuel D'utilisation page 78

USER MANUAL
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
TRANSLATION FROM DUTCH ORIGINAL
5. Carefully retract the bucket cylinder so that the
attachment is released from the CW quick coupler but
remains attached to the front shaft of the CW quick
coupler, as shown in Figure 32.
6. Carefully lower the attachment as shown in Figure
33.
7. Further uncouple the attachment as shown in
Figure 34.
8. Return the locking wedge to the locking position if no
other attachment has to be coupled. If another
attachment has to be coupled, see Section 5.1 on
coupling this attachment.
Eurosteel BV Van Heemskerckweg 10 5928 LL Venlo The Netherlands +31 (0)77 387 60 60 www.eurosteel.nl
Figure 32
Figure 33
Figure 34
- 76 -
- 76 -