Coupling The Hydraulic Version - eurosteel CW.00 Manuel D'utilisation

USER MANUAL
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
TRANSLATION FROM DUTCH ORIGINAL

5.1.1 COUPLING THE HYDRAULIC VERSION

1. Continue to step 2 after completing steps 1
to 6 in Sections 5 and 5.1.
2. Unlock the locking wedge as shown in Figure
13.
Operate the locking wedge cylinder from the
operator position in the excavator according
to the hydraulic control system instructions.
3. Retract the bucket cylinder, and position the
CW quick coupler in front of the attachment
as shown in Figure 13. The attachment must
be positioned so that the coupling points in
front of the front shaft are at the top and
clearly visible.
4. Hook the attachment onto the front shaft of
the CW quick coupler as shown in Figure 14.
Eurosteel BV Van Heemskerckweg 10 5928 LL Venlo The Netherlands +31 (0)77 387 60 60 www.eurosteel.nl
Figure 13
Figure 14
- 63 -
- 63 -