eurosteel CW.00 Manuel D'utilisation page 66

USER MANUAL
USER MANUAL
CW QUICK COUPLERS FOR EXCAVATORS
CW QUICK COUPLERS FOR EXCAVATORS
TRANSLATION FROM DUTCH ORIGINAL
TRANSLATION FROM DUTCH ORIGINAL
5. Position the attachment so that the CW quick
coupler can be rotated against the tool.
To do this, carefully lift up the attachment as
shown in Figure 15.
MAKE SURE THAT THE LOCKING WEDGE IS
FULLY EXTENDED BY CHECKING IT VISUALLY.
6. Carefully rotate the CW quick coupler
towards the attachment by carefully
extending the bucket cylinder, as shown
in Figure 16.Make sure that the locking
wedge is fully extended. If the locking
wedge is not fully extended, the cylinder
or spring guides may be damaged.
PREVENT PARTS OF THE CW QUICK
COUPLER TOUCHING THE GROUND
Eurosteel BV Van Heemskerckweg 10 5928 LL Venlo The Netherlands +31 (0)77 387 60 60 www.eurosteel.nl
Figure 15
Figure 16
- 64 -
- 64 -