Publicité
1
1. Jumper cable negative lead
1. Câble de démarrage négatif
1. Cable auxiliar negativo
6. Connect the negative lead of the jumper ca-
ble to the negative terminal of the charged
battery and the other end of the negative lead
to an unpainted metal surface of the crank-
case to be started.
7. Start the engine. (Refer to "Starting the en-
gine" on pages 6-7–6-11.)
8. After the engine starts, disconnect the nega-
tive lead of the jumper cable from the crank-
case
and
disconnect the positive lead of the jumper ca-
ble from the charged battery and the battery
in the vehicle.
9. Reinstall the console.
10. Reinstall the battery compartment cover.
11. Close the hood.
8-135
charged
battery,
and
then
Publicité
